Skip to content

Service

Band Saw Cutting in Navi Mumbai

Clean, square cutting of bar, pipe and section to length.

Band Saw Cutting: how we handle it.

Every machined part starts as a piece of raw material cut to length. A band saw makes that cut cleanly and squarely with very little material lost in the kerf, which matters when the bar is alloy steel or stainless.

Our cutting facility is equipped with band saw machines that cut round, square and flat bar, pipe and structural sections. We cut blanks for our own machining jobs and also take cutting-only work for fabricators and other workshops that need accurate lengths without tying up their own machines.

Band Saw Cutting in progress

Representative image of the process.

What we can do

  • Round, square, hexagon and flat bar cut to length
  • Pipe, tube and hollow sections
  • Angle, channel and beam sections
  • Single cuts and repeat lengths in bulk
  • Steel, alloy steel, stainless steel, aluminium, brass and bronze
  • Blanks prepared ready for turning or milling

Typical parts and applications

  • Blanks for shafts, bushes and flanges
  • Cut lengths for fabrication jobs
  • Slugs for forging and machining
  • Sectioning of scrap or oversize material

Industries that use this service

FAQ

Band Saw Cutting: common questions

Do you take cutting-only jobs?

Yes. Bring or send your material with a cutting list and we will cut it to length. We can also source the material for you.

How accurate is a band saw cut?

A band saw gives a square cut close to length that is ideal as a machining blank. Where the length itself is a finished dimension, we leave a small allowance and face the part on a lathe.

Why use a band saw instead of gas or abrasive cutting?

A band saw cuts cold. There is no heat-affected edge, no hardened skin and very little waste, so the blank machines easily and the material properties are unchanged.

Send us your drawing. We’ll make the part.

Share a drawing, a sample or a photo with dimensions. We will come back with price and delivery, usually the same day.

Or use the enquiry form