Skip to content

Industry

Petroleum & Petrochemical Components

Flanges, fittings and custom parts for refineries and chemical plants.

Made for the conditions your equipment works in.

Refineries and chemical plants run hot, under pressure and around the clock. A part that fails does not only stop one machine; it can hold up a whole unit. Components for this sector have to be made in the specified material, to the drawing, with threads and sealing faces that fit first time.

We machine custom parts and spares for petroleum and petrochemical users and for the contractors and equipment builders who serve them across the Thane-Belapur industrial belt and Taloja. Work is done to your drawing and material specification, and customer-supplied or certified material is kept identified through the job.

Parts we make and repair

  • Pipe flanges, blind flanges and spacer rings
  • Valve stems, seats, glands and bonnets
  • Pump shafts, sleeves and wear rings
  • Threaded fittings, nipples, plugs and adaptors
  • Studs, special bolts and lock nuts
  • Agitator and mixer shafts
Petroleum & Petrochemical Components

Representative image.

What matters here

How we approach this work.

01

Material traceability

Tell us the grade and whether test certificates are required. Material for your job is kept separate and identified from cutting through to dispatch.

02

Sealing faces and threads

Gasket faces, pipe threads and valve seats are finished and checked with care, because these are the surfaces that decide whether a joint leaks.

03

Shutdown timelines

Maintenance shutdowns have fixed windows. We are open seven days a week and plan urgent spares around your restart date.

FAQ

Common questions

Can you machine to our company or project drawing standard?

Yes. We work to the dimensions, tolerances and material specification on your drawing. Where a standard is referenced, share the relevant details with the enquiry so they can be built into the job.

Do you work with customer-supplied material?

Yes. Many petrochemical customers issue certified bar, forgings or castings. We machine them and return all offcuts if required.

Which materials do you machine for this sector?

Carbon steel, alloy steel and stainless steel 304 and 316 are the most common. For other alloys, send the grade and we will confirm.

Send us your drawing. We’ll make the part.

Share a drawing, a sample or a photo with dimensions. We will come back with price and delivery, usually the same day.

Or use the enquiry form